Razzaz
Home Sign in

How it works

Two stages: set up your welding cell once, then program each part from its STEP file. Every step below runs in the browser.

AConfigure the cell · once per cell

A1Import robot xacro description Coming soon

Robots come from the manufacturers' xacro descriptions published by ROS-Industrial: joints, limits and meshes. Built in today: ABB IRB 2600 and IRB 4600, KUKA KR 16-2 and FANUC M-20iA. Uploading your own robot xacro is coming soon.

A2Import positioner xacro description Coming soon

Positioners are described the same way. Built in today: a rotary headstock, tilt-and-turn positioners (including the ABB IRBP A-250), a welding table, or no positioner. Uploading your own positioner xacro is coming soon.

Uses: xacro

A3Set positioner type, placement, limits

Place the positioner relative to the robot and set its axis limits. The whole cell is one settings file in the Library: start from a built-in cell, duplicate it, edit it as TOML, or import it from a RobotStudio package or controller backup.

A4Set spacer faceplate and stick-out

Set the spacer between the faceplate and the part (100 mm unless you change it), the faceplate diameter and the wire stick-out. Your preferences set the defaults for new projects; each project can change them in Project settings → Cell.

A5Torch and TCP from the torch's STEP

Upload the torch's STEP file. Razzaz measures the contact tip (the tool centre point), the neck angle and the nozzle, and builds a collision model. Set the mass and the controller's tool name. Panasonic torches are built in.

A6Consumables wire and gas

Add welding wire (diameter, density, price) and shielding gas (flow, price). Each project picks one of each, and every run reports the arc time, the wire and gas used, and their cost.

BProgram a part · for each job

B1Ingest STEP upload the part

Upload the part's STEP file. Razzaz finds its axis, stands it on the faceplate end and sets it on the positioner. You can flip it end for end.

B2Analyse surfaces with Open CASCADE

Open CASCADE classifies every surface: the hub, the thread flanks, the thread tips, the flat ends and the inside corners (seams) between faces. It also works out where the torch can really reach, clear of the thread walls.

B3Choose what to weld surfaces to clad, seams to weld

In the 3D studio, click surfaces to clad (overlapping beads that follow the thread), seams for fillet welds (one to three layered passes), or points for spot welds. Add rows of tacks along a seam. Set bead width, wire feed and voltage for each.

Uses: three.js

B4IK and collision check reach, continuity, collisions

Razzaz solves the robot's joint angles for every point, either analytically (fast, the default) or with PyBullet (to cross-check). It checks for joint jumps, collisions between robot, torch, positioner and part, and whether the beads cover the chosen surfaces. Results play back in 3D.

B5Export program .mod · .src · .LS

Download the program for your controller: ABB RAPID (.mod), KUKA KRL (.src) or FANUC TP (.LS), with a setup sheet, a PDF report and an estimate of time and consumables.

Controllers

The plan doesn't depend on the robot brand. The robot chosen for the cell decides which post-processor writes the program.

ControllerProgramRobots set up today
ABB IRC5RAPID module .mod, robot and positioner moving togetherIRB 2600-12/1.65, IRB 4600 with IRBP positioners
KUKA KRCKRL programs .src with a setup sheetKR 16-2 with one external axis
FANUCTP programs .LS with a setup sheetM-20iA, fixed or with one positioner axis

Open-source libraries

Razzaz is written in Python and built on these projects.